Eave & Soffit Lighting Installation in Madera, CA
Madera, CA · From $950

Eave & Soffit Lighting in Madera, CA

Permanent eave and soffit lighting in color-matched aluminum track — white, bronze, black, or brown. Hidden by day, brilliant at night. Madera homes — especially in master-planned communities like Tesoro Viejo and Riverstone — favor architectural permanent lighting that shows off the modern designs year-round.

7-day refundPulled and refunded in full. No fine print.
5-year warrantyTrack + LEDs covered five years. Workmanship too.
$0 downFrom $89/month at 0% APR.
Locally installedLic. #1234567. Bonded. Insured.

Madera homeowners

Eave & Soffit Lighting for Madera homes.

Eave and soffit lighting is the foundation install — the continuous track mounted under your roofline that defines the entire system. The track itself is the most invisible element of any permanent lighting setup.

Architecturally, Madera runs the gamut: Sumner Hill stucco ranchers, Riverstone Madera two-story Mediterranean builds, and the older bungalows around Old Madera Town with deep porch overhangs. Eave & Soffit Lighting reads differently on each — a tract single-story takes ~80 linear feet of track on the front facade, while a custom build with multiple roof planes can need 200+ feet across three to five independent zones.

We design every Madera job around what the home actually needs, not a flat per-foot price. The free on-site quote includes measurement, ladder-access check, written pricing on the spot, and a 3D render of the lit-up facade if your HOA wants one. 25-minute drive from our Fresno shop means a tight feedback loop on warranty and service. Two-story homes: ~200 ft typical, $5,800 starting.

Eave & Soffit Lighting

Real installs, not stock photos.

Selected from our 2400+ Central Valley installs.

Eave & Soffit Lighting — featured roofline outline by Twilight Zone Permanent Lighting
Eave & Soffit Lighting — eave-mounted track detail by Twilight Zone Permanent Lighting
Eave & Soffit Lighting — two-story facade install by Twilight Zone Permanent Lighting
Eave & Soffit Lighting — soffit channel close-up by Twilight Zone Permanent Lighting
Eave & Soffit Lighting — full-perimeter install at twilight by Twilight Zone Permanent Lighting
Eave & Soffit Lighting — side-yard accent run by Twilight Zone Permanent Lighting

Use cases

Where Madera homeowners use this most.

Single-story ranches

Single-story ranches

~100 ft typical, $2,800 starting.

Two-story homes

Two-story homes

~200 ft typical, $5,800 starting.

Custom estates

Custom estates

400+ ft, fully customized track routing.

Permanent outdoor lighting install in Madera, CA

Madera Ranchos · Madera, CA

Installed under the eaves a year ago and love them. Just added Landscape in the yard, and Patio Lights over the pool. Best toy I've ever owned.
Murray H. Verified homeowner · 4.9★ Google review

The hardware

Built for fifty thousand hours.

LED chip
RGBIC-RD
Colors
16 million
Patterns
200+ presets
Lifespan
50,000+ hours
Weather
IP67 · -40°F to 140°F
Smart home
Alexa, Google Home, Control 4, Nice Elan

Madera install process

Quoted, designed, installed — in a day.

Free quote, design, install, app setup, walkthrough. Most homes finished by sundown.

  1. 1

    Free quote in 24 hours

    We measure linear feet, identify ladder access, propose track color, and quote in writing on the spot. No phone-tag, no upsells.

  2. 2

    Design + track color

    Match your existing trim — white, bronze, brown, or black. 3D rendering for HOA submission if you need it. Free.

  3. 3

    Install in a day

    Single-story homes finish in 6–8 hours. Our W-2 crew, in-house. No subcontractors, ever.

  4. 4

    Wiring + control box

    Concealed channel-routed wiring. One drop to the attic. Weatherproof box mounted in your garage. Surge protection inline.

  5. 5

    App + walkthrough

    We pair the controller with your Wi-Fi, train you on scenes and schedules, and don't leave until you've changed colors from your phone.

Frequently Asked Questions

How much does eave & soffit lighting cost in Madera?
Eave & Soffit Lighting in Madera starts at $950 for a Starter install. Most Madera homes range $2,800-$5,800. Two-story estates: $7,500+. Financing from $89/month at 0% APR.
Do you serve Madera Ranchos and Tesoro Viejo?
Yes. We install across all Madera neighborhoods including Madera Ranchos, Tesoro Viejo, Sumner Hill, Riverstone Madera, Old Madera Town, and surrounding ZIPs 93636, 93637, 93638, 93639.
Will the lights survive Madera summers?
Yes. The track is rated IP67 and tested -40°F to 140°F — engineered for 113°F+ Madera summers. Madera is the gateway to Yosemite. Tesoro Viejo's elevation gives mild evenings. Same IP67 rating handles year-round.
How long is the install in Madera?
Single-story homes finish in 6-8 hours. Two-story typically 1-2 days. Drive time from our Fresno shop to Madera is about 25 minutes, so we keep the same crew on-site through the install.
Will eave lighting damage my roof?
No. Track mounts into the soffit substructure with stainless screws — same anchoring as gutters. Removal leaves only thumbtack-sized holes.

More services

Other lighting we install.

Same crew, same warranty, same Jellyfish RGBIC-RD hardware.

Service areas

Eave & Soffit Lighting across the Central Valley.

Free on-site estimates within a 60-mile radius of Fresno.

Next steps

Get your free quote.

  1. 1 Request your free estimate.
  2. 2 We help you choose the right lighting for your property and budget.
  3. 3 Schedule your install with our W-2 technicians.
Or call us directly (559) 373-2220

By submitting you agree to receive communication. 7-day refund. $0 down.

Call Get Quote →