Custom Architectural Lighting Installation in San Francisco, CA
San Francisco, CA · From $7,500

Custom Architectural Lighting in San Francisco, CA

Custom architectural lighting for estates and luxury homes — bespoke design with multi-zone advanced control, integrated landscape, and white-glove install team. San Francisco's housing stock has no equal: bay-windowed Victorians and Edwardian rowhouses running shoulder to shoulder through Noe Valley and the Inner Sunset, mansion facades in Pacific Heights and Sea Cliff, tile-roofed Mediterraneans in St. Francis Wood below Mount Davidson. The rooflines vary as much as the facades — flat parapet runs through the dense eastern blocks and the Sunset and Richmond rowhouse grids, pitched composition and clay tile up in St. Francis Wood, Forest Hill and Sea Cliff — and permanent lighting traces either edge without ever touching the historic trim.

7-day refundPulled and refunded in full. No fine print.
5-year warrantyTrack + LEDs covered five years. Workmanship too.
$0 downFrom $89/month at 0% APR.
Locally installedLic. #1234567. Bonded. Insured.

San Francisco homeowners

Custom Architectural Lighting for San Francisco homes.

Custom architectural lighting is our highest-tier residential service. We design bespoke installs for custom estates — the kind of lighting that integrates with the architecture, not just attached to it.

The reason permanent lighting works in San Francisco where seasonal Christmas-light services don't is math. A typical San Francisco install/teardown service runs $800–$1,800 a year — over a decade that's $8,000–$18,000 versus a $7,500 permanent install once. 72°F summers also mean you need lighting that doesn't sag or yellow under year-round UV, which is why we use commercial-grade aluminum track instead of plastic clip channels.

San Francisco architectural lighting installs typically run between $7.5K (single-story front facade) and $45.0K (full perimeter, two-story, multi-zone). HOA submittal packages — spec sheets, 3D renderings, color samples — are included free for any submission you need. Bernal Heights, Cole Valley, and Inner Sunset all sit under active architectural review, so the submittal package matters as much as the hardware. Estate homes is a common San Francisco configuration: Multi-building integration, landscape lighting, pool deck.

What San Francisco weather does to a run of track. San Francisco trades temperature swings for constant marine layer and ocean salt air, and the fog rolling in over the Sunset and Richmond keeps fascia boards damp most nights. That makes IP67-sealed diodes and anodized aluminum track the deciding factors here, since corrosion, not heat, is what kills exposed fixtures on this peninsula. That is the whole argument for anodized aluminum channel over the clip-on strands a seasonal service hangs each November, and it is why the San Francisco spec sheet assumes lows around 46°F rather than a generic mild-climate rating.

Architectural Lighting quotes in San Francisco most often come from Mission Bay, Parkmerced, St. Francis Wood and the surrounding San Francisco County neighborhoods, where elevations repeat across a street and a clean trim line is what separates one facade from the next. For game-day and school-spirit scenes, San Francisco programs Lowell High Cardinals and Saint Ignatius College Prep Wildcats colors on a schedule so the house switches itself over on game nights without anyone touching the app.

Custom Architectural Lighting

Real installs, not stock photos.

Selected from our 2400+ Central Valley installs.

Custom Architectural Lighting — featured roofline outline by Twilight Zone Permanent Lighting
Custom Architectural Lighting — eave-mounted track detail by Twilight Zone Permanent Lighting
Custom Architectural Lighting — two-story facade install by Twilight Zone Permanent Lighting
Custom Architectural Lighting — soffit channel close-up by Twilight Zone Permanent Lighting
Custom Architectural Lighting — full-perimeter install at twilight by Twilight Zone Permanent Lighting
Custom Architectural Lighting — side-yard accent run by Twilight Zone Permanent Lighting

Use cases

Where San Francisco homeowners use this most.

Estate homes

Estate homes

Multi-building integration, landscape lighting, pool deck.

Custom architecture

Custom architecture

Track routing engineered to architectural lines.

Trophy properties

Trophy properties

Showcase your home as the most-photographed in the neighborhood.

The hardware

Built for fifty thousand hours.

LED chip
RGBIC-RD
Colors
16 million
Patterns
200+ presets
Lifespan
50,000+ hours
Weather
IP67 · -40°F to 140°F
Smart home
Alexa, Google Home, Control 4, Nice Elan

San Francisco install process

Quoted, designed, installed — in a day.

Free quote, design, install, app setup, walkthrough. Most homes finished by sundown.

  1. 1

    Free quote in 24 hours

    We measure linear feet, identify ladder access, propose track color, and quote in writing on the spot. No phone-tag, no upsells.

  2. 2

    Design + track color

    Match your existing trim — white, bronze, brown, or black. 3D rendering for HOA submission if you need it. Free.

  3. 3

    Install in a day

    Single-story homes finish in 6–8 hours. Our W-2 crew, in-house. No subcontractors, ever.

  4. 4

    Wiring + control box

    Concealed channel-routed wiring. One drop to the attic. Weatherproof box mounted in your garage. Surge protection inline.

  5. 5

    App + walkthrough

    We pair the controller with your Wi-Fi, train you on scenes and schedules, and don't leave until you've changed colors from your phone.

Frequently Asked Questions

How much does custom architectural lighting cost in San Francisco?
Custom Architectural Lighting in San Francisco starts at $7,500 for a Starter install. Most San Francisco homes range $2,800-$5,800. Two-story estates: $7,500+. Financing from $89/month at 0% APR.
Do you serve Pacific Heights and Presidio Heights?
Yes. We install across all San Francisco neighborhoods including Pacific Heights, Presidio Heights, Sea Cliff, St. Francis Wood, Forest Hill, Noe Valley, and surrounding ZIPs 94102, 94103, 94105, 94107, 94108, 94109, 94110, 94114, 94115, 94116, 94117, 94118, 94121, 94122.
Will the lights survive San Francisco summers?
Yes. The track is rated IP67 and tested -40°F to 140°F — engineered for 72°F+ San Francisco summers. San Francisco trades temperature swings for constant marine layer and ocean salt air, and the fog rolling in over the Sunset and Richmond keeps fascia boards damp most nights. That makes IP67-sealed diodes and anodized aluminum track the deciding factors here, since corrosion, not heat, is what kills exposed fixtures on this peninsula.
How long is the install in San Francisco?
Single-story homes finish in 6-8 hours. Two-story typically 1-2 days. San Francisco is served by our San Francisco & Peninsula install crew on a scheduled route — the same W-2 installers, the same RGBIC-RD hardware, and the same warranty we run in the Central Valley. The same crew stays on-site through the whole install.
Do you collaborate with architects?
Yes — many of our estate installs are designed during the build, with track integrated into the architectural plans.

More services

Other lighting we install.

Same crew, same warranty, same Jellyfish RGBIC-RD hardware.

Service areas

Custom Architectural Lighting across the Central Valley.

Free on-site estimates across the Central Valley, Northern San Joaquin Valley, Sacramento Metro, East Bay, South Bay and San Francisco & Peninsula.

Next steps

Get your free quote.

  1. 1 Request your free estimate.
  2. 2 We help you choose the right lighting for your property and budget.
  3. 3 Schedule your install with our W-2 technicians.
Or call us directly (559) 373-2220
Call Get Quote →