Custom Architectural Lighting Installation in Burlingame, CA
Burlingame, CA · From $7,500

Custom Architectural Lighting in Burlingame, CA

Custom architectural lighting for estates and luxury homes — bespoke design with multi-zone advanced control, integrated landscape, and white-glove install team. Burlingame grew up under its eucalyptus canopy, and the city still protects the trees: 1920s Mediterraneans and Craftsman bungalows in Burlingame Park and the Easton Addition, tidy postwar ranches up in Ray Park and Mills Estate. Deep eaves and heavy foliage swallow ground-level fixtures, which is why a fascia-mounted permanent system carries the load on the blocks off Burlingame Avenue and Broadway.

7-day refundPulled and refunded in full. No fine print.
5-year warrantyTrack + LEDs covered five years. Workmanship too.
$0 downFrom $89/month at 0% APR.
Locally installedLic. #1234567. Bonded. Insured.

Burlingame homeowners

Custom Architectural Lighting for Burlingame homes.

Custom architectural lighting is our highest-tier residential service. We design bespoke installs for custom estates — the kind of lighting that integrates with the architecture, not just attached to it.

Two things Burlingame homes do to permanent lighting that nobody warns you about: summers crest 77°F and bake any non-IP67-rated chip, and tule fog drops nighttime humidity onto fixtures. The Jellyfish RGBIC-RD track we install is rated -40°F to 140°F, sealed IP67, and warrantied 5 years on LEDs and lifetime on the track itself.

Architectural Lighting on a Burlingame home is usually a one-day install — the W-2 crew arrives at 8 AM, the wiring drops cleanly through one attic penetration, and you're cycling colors from the app by sunset. Coverage runs across Mills Estate, Burlingame Hills, and Lyon-Hoag, with the 31K Burlingame households roughly evenly split between single-story tract homes and two-story custom builds. Most Burlingame owners start with estate homes; multi-building integration, landscape lighting, pool deck.

What Burlingame weather does to a run of track. Burlingame sits between the Bay and the Skyline ridge, so it catches both salt-laden bayside wind off the Anza shoreline and cool overnight fog dripping through the eucalyptus. Marine-grade anodized aluminum channel and IP67 sealing are what keep a system intact here; standard steel hardware pits within a few seasons this close to the water. That is the whole argument for anodized aluminum channel over the clip-on strands a seasonal service hangs each November, and it is why the Burlingame spec sheet assumes lows around 43°F rather than a generic mild-climate rating.

Architectural Lighting quotes in Burlingame most often come from Mills Estate, Burlingame Park, Easton Addition and the surrounding San Mateo County neighborhoods, where elevations repeat across a street and a clean trim line is what separates one facade from the next. For game-day and school-spirit scenes, Burlingame programs Burlingame High Panthers and Mercy High Bears colors on a schedule so the house switches itself over on game nights without anyone touching the app.

Custom Architectural Lighting

Real installs, not stock photos.

Selected from our 2400+ Central Valley installs.

Custom Architectural Lighting — featured roofline outline by Twilight Zone Permanent Lighting
Custom Architectural Lighting — eave-mounted track detail by Twilight Zone Permanent Lighting
Custom Architectural Lighting — two-story facade install by Twilight Zone Permanent Lighting
Custom Architectural Lighting — soffit channel close-up by Twilight Zone Permanent Lighting
Custom Architectural Lighting — full-perimeter install at twilight by Twilight Zone Permanent Lighting
Custom Architectural Lighting — side-yard accent run by Twilight Zone Permanent Lighting

Use cases

Where Burlingame homeowners use this most.

Estate homes

Estate homes

Multi-building integration, landscape lighting, pool deck.

Custom architecture

Custom architecture

Track routing engineered to architectural lines.

Trophy properties

Trophy properties

Showcase your home as the most-photographed in the neighborhood.

The hardware

Built for fifty thousand hours.

LED chip
RGBIC-RD
Colors
16 million
Patterns
200+ presets
Lifespan
50,000+ hours
Weather
IP67 · -40°F to 140°F
Smart home
Alexa, Google Home, Control 4, Nice Elan

Burlingame install process

Quoted, designed, installed — in a day.

Free quote, design, install, app setup, walkthrough. Most homes finished by sundown.

  1. 1

    Free quote in 24 hours

    We measure linear feet, identify ladder access, propose track color, and quote in writing on the spot. No phone-tag, no upsells.

  2. 2

    Design + track color

    Match your existing trim — white, bronze, brown, or black. 3D rendering for HOA submission if you need it. Free.

  3. 3

    Install in a day

    Single-story homes finish in 6–8 hours. Our W-2 crew, in-house. No subcontractors, ever.

  4. 4

    Wiring + control box

    Concealed channel-routed wiring. One drop to the attic. Weatherproof box mounted in your garage. Surge protection inline.

  5. 5

    App + walkthrough

    We pair the controller with your Wi-Fi, train you on scenes and schedules, and don't leave until you've changed colors from your phone.

Frequently Asked Questions

How much does custom architectural lighting cost in Burlingame?
Custom Architectural Lighting in Burlingame starts at $7,500 for a Starter install. Most Burlingame homes range $2,800-$5,800. Two-story estates: $7,500+. Financing from $89/month at 0% APR.
Do you serve Burlingame Park and Burlingame Terrace?
Yes. We install across all Burlingame neighborhoods including Burlingame Park, Burlingame Terrace, Burlingables, Easton Addition, Ray Park, Mills Estate, and surrounding ZIPs 94010, 94011.
Will the lights survive Burlingame summers?
Yes. The track is rated IP67 and tested -40°F to 140°F — engineered for 77°F+ Burlingame summers. Burlingame sits between the Bay and the Skyline ridge, so it catches both salt-laden bayside wind off the Anza shoreline and cool overnight fog dripping through the eucalyptus. Marine-grade anodized aluminum channel and IP67 sealing are what keep a system intact here; standard steel hardware pits within a few seasons this close to the water.
How long is the install in Burlingame?
Single-story homes finish in 6-8 hours. Two-story typically 1-2 days. Burlingame is served by our San Francisco & Peninsula install crew on a scheduled route — the same W-2 installers, the same RGBIC-RD hardware, and the same warranty we run in the Central Valley. The same crew stays on-site through the whole install.
Do you collaborate with architects?
Yes — many of our estate installs are designed during the build, with track integrated into the architectural plans.

More services

Other lighting we install.

Same crew, same warranty, same Jellyfish RGBIC-RD hardware.

Service areas

Custom Architectural Lighting across the Central Valley.

Free on-site estimates across the Central Valley, Northern San Joaquin Valley, Sacramento Metro, East Bay, South Bay and San Francisco & Peninsula.

Next steps

Get your free quote.

  1. 1 Request your free estimate.
  2. 2 We help you choose the right lighting for your property and budget.
  3. 3 Schedule your install with our W-2 technicians.
Or call us directly (559) 373-2220
Call Get Quote →