Permanent Patio Lighting Installation in San Francisco, CA
San Francisco, CA · From $1,200

Permanent Patio Lighting in San Francisco, CA

Permanent patio lighting that replaces seasonal bistro string lights with weather-rated, app-controlled, music-syncable installations under pergolas and over outdoor living spaces. San Francisco's housing stock has no equal: bay-windowed Victorians and Edwardian rowhouses running shoulder to shoulder through Noe Valley and the Inner Sunset, mansion facades in Pacific Heights and Sea Cliff, tile-roofed Mediterraneans in St. Francis Wood below Mount Davidson. The rooflines vary as much as the facades — flat parapet runs through the dense eastern blocks and the Sunset and Richmond rowhouse grids, pitched composition and clay tile up in St. Francis Wood, Forest Hill and Sea Cliff — and permanent lighting traces either edge without ever touching the historic trim.

7-day refundPulled and refunded in full. No fine print.
5-year warrantyTrack + LEDs covered five years. Workmanship too.
$0 downFrom $89/month at 0% APR.
Locally installedLic. #1234567. Bonded. Insured.

San Francisco homeowners

Permanent Patio Lighting for San Francisco homes.

Patio lighting is the most-requested expansion add-on after the main perimeter install. We mount the same RGBIC-RD track under pergolas, around outdoor kitchens, and along patio cover edges — the same app, the same colors, music-sync ready.

The reason permanent lighting works in San Francisco where seasonal Christmas-light services don't is math. A typical San Francisco install/teardown service runs $800–$1,800 a year — over a decade that's $8,000–$18,000 versus a $1,200 permanent install once. 72°F summers also mean you need lighting that doesn't sag or yellow under year-round UV, which is why we use commercial-grade aluminum track instead of plastic clip channels.

San Francisco patio lighting installs typically run between $1.2K (single-story front facade) and $7.2K (full perimeter, two-story, multi-zone). HOA submittal packages — spec sheets, 3D renderings, color samples — are included free for any submission you need. Forest Hill, Noe Valley, and Bernal Heights all sit under active architectural review, so the submittal package matters as much as the hardware. Live music is a common San Francisco configuration: Beat-reactive color shifts.

What San Francisco weather does to a run of track. San Francisco trades temperature swings for constant marine layer and ocean salt air, and the fog rolling in over the Sunset and Richmond keeps fascia boards damp most nights. That makes IP67-sealed diodes and anodized aluminum track the deciding factors here, since corrosion, not heat, is what kills exposed fixtures on this peninsula. That is the whole argument for anodized aluminum channel over the clip-on strands a seasonal service hangs each November, and it is why the San Francisco spec sheet assumes lows around 46°F rather than a generic mild-climate rating.

Patio Lighting quotes in San Francisco most often come from Mission Bay, Parkmerced, St. Francis Wood and the surrounding San Francisco County neighborhoods, where elevations repeat across a street and a clean trim line is what separates one facade from the next. For game-day and school-spirit scenes, San Francisco programs Lowell High Cardinals and Saint Ignatius College Prep Wildcats colors on a schedule so the house switches itself over on game nights without anyone touching the app.

Permanent Patio Lighting

Real installs, not stock photos.

Selected from our 2400+ Central Valley installs.

Permanent Patio Lighting — featured roofline outline by Twilight Zone Permanent Lighting
Permanent Patio Lighting — eave-mounted track detail by Twilight Zone Permanent Lighting
Permanent Patio Lighting — two-story facade install by Twilight Zone Permanent Lighting
Permanent Patio Lighting — soffit channel close-up by Twilight Zone Permanent Lighting
Permanent Patio Lighting — full-perimeter install at twilight by Twilight Zone Permanent Lighting
Permanent Patio Lighting — side-yard accent run by Twilight Zone Permanent Lighting

Use cases

Where San Francisco homeowners use this most.

Dinner parties

Dinner parties

Warm dim mood lighting.

Live music

Live music

Beat-reactive color shifts.

Year-round outdoor living

Year-round outdoor living

Adjustable warm whites for evening use.

The hardware

Built for fifty thousand hours.

LED chip
RGBIC-RD
Colors
16 million
Patterns
200+ presets
Lifespan
50,000+ hours
Weather
IP67 · -40°F to 140°F
Smart home
Alexa, Google Home, Control 4, Nice Elan

San Francisco install process

Quoted, designed, installed — in a day.

Free quote, design, install, app setup, walkthrough. Most homes finished by sundown.

  1. 1

    Free quote in 24 hours

    We measure linear feet, identify ladder access, propose track color, and quote in writing on the spot. No phone-tag, no upsells.

  2. 2

    Design + track color

    Match your existing trim — white, bronze, brown, or black. 3D rendering for HOA submission if you need it. Free.

  3. 3

    Install in a day

    Single-story homes finish in 6–8 hours. Our W-2 crew, in-house. No subcontractors, ever.

  4. 4

    Wiring + control box

    Concealed channel-routed wiring. One drop to the attic. Weatherproof box mounted in your garage. Surge protection inline.

  5. 5

    App + walkthrough

    We pair the controller with your Wi-Fi, train you on scenes and schedules, and don't leave until you've changed colors from your phone.

Frequently Asked Questions

How much does permanent patio lighting cost in San Francisco?
Permanent Patio Lighting in San Francisco starts at $1,200 for a Starter install. Most San Francisco homes range $2,800-$5,800. Two-story estates: $7,500+. Financing from $89/month at 0% APR.
Do you serve Pacific Heights and Presidio Heights?
Yes. We install across all San Francisco neighborhoods including Pacific Heights, Presidio Heights, Sea Cliff, St. Francis Wood, Forest Hill, Noe Valley, and surrounding ZIPs 94102, 94103, 94105, 94107, 94108, 94109, 94110, 94114, 94115, 94116, 94117, 94118, 94121, 94122.
Will the lights survive San Francisco summers?
Yes. The track is rated IP67 and tested -40°F to 140°F — engineered for 72°F+ San Francisco summers. San Francisco trades temperature swings for constant marine layer and ocean salt air, and the fog rolling in over the Sunset and Richmond keeps fascia boards damp most nights. That makes IP67-sealed diodes and anodized aluminum track the deciding factors here, since corrosion, not heat, is what kills exposed fixtures on this peninsula.
How long is the install in San Francisco?
Single-story homes finish in 6-8 hours. Two-story typically 1-2 days. San Francisco is served by our San Francisco & Peninsula install crew on a scheduled route — the same W-2 installers, the same RGBIC-RD hardware, and the same warranty we run in the Central Valley. The same crew stays on-site through the whole install.
Can patio lights be added later?
Yes — most customers add patio integration during a second-phase install. The original control box handles it.

More services

Other lighting we install.

Same crew, same warranty, same Jellyfish RGBIC-RD hardware.

Next steps

Get your free quote.

  1. 1 Request your free estimate.
  2. 2 We help you choose the right lighting for your property and budget.
  3. 3 Schedule your install with our W-2 technicians.
Or call us directly (559) 373-2220
Call Get Quote →